Skudo® is the plasterboard counterframe kit, in single or double versions, which is extremely easy to assemble thanks to the special interlocking system and easy to transport thanks to the very small size of the packaging.
Available for doorways up to 200 cm in width - in the double version - and 200/203/210 cm in height.
type of opening
Kit includes two pulleys, with fasteners, wire cable, tensioning brackets and cable clips. Screws, hardware and hex key for fastening included. Available up to 200 cm (100+100). Applicable with counterframe installed. Recommended combination with soft closing kit.
Pneumatic system-invisible from the outside-that automatically closes the sliding door once it has been opened; allows both keeping the door fully open and adjusting the closing speed. Kit includes a pneumatic piston, support with pulley, drive bracket, magnet and steel cable. Hardware included. Can be applied with the counterframe installed, thanks to the removable track. Reduces passage clearance by 30 mm. Available for doors up to 40 kg weight and 100 cm opening. Use of the system on doors subject to specified regulations should be verified by the customer in accordance with national laws.
The 150 kg trolley kit consists of 2 ambidextrous self-centering trolleys, each equipped with 4 coated ball bearings, self-centering and interlocking drawbar, brackets for attaching the door panel, adjustable bumper rubber grommet, and variable-hardness trolley stop at rail closure. The kit also includes hardware, dowels and fasteners for fixing. Suitable for wooden door panels.
Kit includes a 40, 50 or 80 kg shock absorber and attachment system. Screws and hardware included. All soft closing kits can be installed inside the track, making the system integral with the door panel and invisible from the outside, thanks to the special sliding bracket. Applicable when the counterframe is installed, thanks to the removable rail. Applicable only to wooden door panels.
The upper element (transom) fits doors with an opening up to 100 cm. The vertical element (upright) fits doors with heights up to 210 cm. Finish to be painted. Other sizes are available, for feasibility contact the company.
Accessory that makes it possible to obtain a double counterframe by joining two single ones, suitable for both plasterboard and plaster versions. To join two single counterframes, it is necessary to cut the rails by 50 mm.
Kit includes monopinza for 10 mm glass thickness (maximum length 1200 mm), caps, aluminum covers, trolley fixing brackets and bottom rail. Screws and hardware for fixing included. Glass does not require machining or drilling. Maximum capacity of the clamps 100 kg. Includes specific tiller and extra stop on opening. Trolley kit not included.
The integrated motorization kit is the kit that is invisible from the outside to automate the movement of door panels. It includes: a 24V gearmotor with support, 230Vac/24Vdc board-transformer, belt with panel fastening system, idler pulley with belt tensioning system. Can be installed with the counterframe already in place, reducing the passage clearance by about 80 mm; alternatively, prepare an increased counterframe of 100 mm in the design stage. The system is Push&Go: if the panel is moved manually, it completes the opening/closing cycle. The system automatically learns the opening and closing limits of the door and slows down the stroke of the panel before total closing/opening. Standard equipment allows push-button opening (either two-position switch or sequential push-button) and automatic door closing after 2, 5 or 10 seconds of inactivity. Photocells, wall-mounted or pocket remote controls, and home automation kits for opening from smartphones are available.
Kit includes 2 adjustable clamps for glass thickness 8-10 mm and bottom rail. Screws and hardware for fixing included. Glass does not require machining or drilling. Maximum clamp load capacity 80 kg with plain pane or 120 kg with perforated pane and safety pins (included). Includes specific tiller and extra stop on opening. Trolley kit not included.
Kit includes 2 adjustable clamps for glass thickness 8-10-12 mm and bottom rail. Screws and hardware for fixing included. Maximum clamp capacity 80 kg, provides for slab drilling, safety pins included. The clamps are fully concealed in the jamb kit (with 50 mm transom). Includes specific drawbar and extra stop on opening. Trolley kit not included.
Kit includes stringers, mullion and pillars for architectural span up to 200 cm (100 + 100) wide and 210 cm high, to be cut to size. Model for finished wall plaster 105 and plasterboard 100. Finish to be painted. Jambs are complete with dust brush and black gasket. Other sizes are available, check feasibility with company. Available for glass doors.
he kit includes stringers, mullion and pilasters for architectural span up to 100 cm wide and 210 cm high, to be cut to size. Model for finished wall plaster 105 and plasterboard 100. The jambs are complete with dust brush and black color gasket. Other sizes are available, for feasibility contact the company. Available for glass doors.
Lifty System® is Protek's exclusive patented system that allows for faster adjustment and assembly of the door, completely eliminating the use of hand tools. Screws and fasteners included in the kit. Maximum load capacity 150 kg. Suitable for wooden doors. Trolley kit not included.
Variable hardness element, which can be installed inside the rail, allowing to limit the maximum opening of the door panel. Applicable when the counterframe is installed, thanks to the removable track.
The kit includes a bottom rail made of aluminum to facilitate panel sliding, up to 120 cm in length. Screws for fixing included. Needs modifications to the bottom milling of the panel.
The system allows the door to be completely recessed inside the wall. By pushing with slight pressure, the door is pushed out of the wall so that it can be closed. Can be applied with the counterframe installed, thanks to the pull-out track. Not compatible with simultaneous opening kit. Not compatible with self-closing kit.
Kit includes two pulleys, with fasteners, wire cable, tensioning brackets and cable clips. Screws, hardware and hex key for fastening included.
Available up to 200 cm (100+100).
Applicable when the counterframe is installed.
Combination with the soft closing kit is recommended.
Pneumatic system-invisible from the outside-that automatically closes the sliding door once it has been opened; allows both keeping the door fully open and adjusting the closing speed.
Kit includes a pneumatic piston, support with pulley, drag bracket, magnet and steel cable. Hardware included.
Can be applied with the counterframe installed, thanks to the pull-out track.
It reduces the passage clearance by 30 mm.
Available for doors up to 40 kg weight and 100 cm opening.
Use of the system on doors subject to specified regulations should be verified by the customer in accordance with national laws.
The 150 kg trolley kit consists of 2 ambidextrous self-centering trolleys, each equipped with 4 coated ball bearings, self-centering and interlocking drawbar, brackets for attaching the door panel, adjustable bumper rubber grommet, and variable-hardness trolley stop at rail closure. The kit also includes hardware, dowels and bolts for fastening.
Suitable for wooden door panels.
Kit includes a 40, 50 or 80 kg shock absorber and attachment system. Screws and hardware included.
All soft closing kits can be installed inside the track, making the system integral with the door panel and invisible from the outside, thanks to the special sliding bracket.
Can be applied with the counterframe installed, thanks to the removable rail.
Applicable only to wooden door panels.
The upper element (crosspiece) fits doors opening up to 100 cm.
The vertical element (pillar) fits doors up to 210 cm in height.
Finish to be painted.
Other sizes are available, for feasibility contact the company.
Accessory that makes it possible to obtain a double counterframe by joining two single ones, suitable for both plasterboard and plaster versions.
To join two individual counterframes, it is necessary to cut the rails by 50 mm.
Kit includes monopinza for 10 mm glass thickness (maximum length 1200 mm), caps, aluminum covers, trolley fixing brackets and bottom rail. Screws and hardware for fixing included.
The glass does not require machining or drilling.
Maximum capacity of the clamps 100 kg.
Includes specific rudder and extra catch in opening.
Trolley kit not included.
The integrated motorization kit is the kit invisible from the outside that allows the movement of door panels to be automated.
Includes: a 24V gearmotor with stand, 230Vac/24Vdc board-transformer, belt with panel fastening system, idler pulley with belt tensioning system.
Can be installed with the counterframe already in place, reducing the passage clearance by about 80 mm; alternatively, prepare an increased counterframe of 100 mm at the design stage.
The system is Push&Go: if the panel is moved manually, it completes the open/close cycle.
The system automatically learns the opening and closing limits of the door and slows down the stroke of the panel before total closing/opening.
Standard equipment allows for push-button opening (either two-position switch or sequential push-button) and automatic closing of the door after 2, 5, or 10 seconds of inactivity.
Photocells, wall or pocket remote controls, and home automation kits for opening from smartphones available.
Kit includes 2 adjustable clamps for glass thickness 8-10 mm and bottom rail. Screws and hardware for fixing included.
The glass does not require machining or drilling.
Maximum clamp capacity 80 kg with smooth slab or 120 kg with perforated slab and safety pins (included).
Includes specific rudder and extra catch in opening.
Trolley kit not included.
Kit includes 2 adjustable clamps for glass thickness 8-10-12 mm and bottom rail. Screws and hardware for fixing included.
Maximum clamp capacity 80 kg, provides for slab drilling, safety pins included.
The clamps are fully concealed in the jamb kit (with 50 mm transom). Includes specific drawbar and extra stop in opening.
Trolley kit not included.
Kit includes stringers, mullion and pillars for architectural span up to 200 cm (100 + 100) wide and 210 cm high, to be cut to size. Model for finished wall plaster 105 and plasterboard 100.
Finish to be painted.
The jambs are complete with dust brush and black gasket.
Other sizes are available, check feasibility at the company.
Available for glass doors.
he kit includes stringers, mullion and pilasters for architectural span up to 100 cm wide and 210 cm high, to be cut to size. Model for finished wall plaster 105 and plasterboard 100.
The jambs are complete with dust brush and black color gasket.
Other sizes are available, for feasibility contact the company.
Available for glass doors.
Lifty System® is Protek's exclusive patented system that allows for faster adjustment and assembly of the door, completely eliminating the use of hand tools. Screws and fasteners included in the kit.
Maximum capacity 150 kg.
Suitable for wooden doors.
Trolley kit not included.
Variable hardness element, which can be installed inside the rail, allowing the maximum opening of the door panel to be limited.
Can be applied with the counterframe installed, thanks to the pull-out track.
The kit includes a bottom rail made of aluminum to facilitate panel sliding, up to 120 cm in length. Screws for fixing included.
Needs modifications to the lower milling of the panel.
The system allows the door to be completely recessed inside the wall. By pushing with slight pressure, the door is pushed out of the wall so that it can be closed.
Can be applied with the counterframe installed, thanks to the pull-out track.
Not compatible with simultaneous opening kit.
Not compatible with self-closing kit.
Handle for sliding glass doors. Available in matte aluminum with metallic bottom.
Square handle with drag lever. Available with keyhole or pawl lock. Available in polished brass, polished chrome and satin chrome.
Square handle kit with drag handle for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Square handle kit with drag handle and keyhole lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Square handle kit with drag handle and pawl lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle with drag lever. Available with keyhole or pawl lock. Available in polished brass, polished chrome and satin chrome.
Round handle kit with drag handle for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle kit with drag handle and keyhole lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle kit with drag handle and pawl lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Vertical anodized aluminum handle for sliding door. Available in satin anthracite, satin silver, satin bronze, satin pewter and white.
Front cover plate with drag lever. Available for sliding doors. Available in matte chrome. For other finishes please contact the company.
For sliding doors. Available in matte chrome. For other finishes contact the company.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors. Available in matte chrome. For other finishes contact the company.
Front cover plate for sliding door. Available in matte aluminum with metallic bottom.
Front cover plate with drag lever. Available for sliding doors. Available in matte chrome. For other finishes contact the company.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors. Available in matte chrome. For other finishes contact the company.
Front cover plate for sliding door.
Available in matte aluminum with a metallic background.
Front cover plate with drag lever. Available for sliding doors.
Available in matte chrome. For other finishes contact the company.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors.
Available in matte chrome. For other finishes contact the company.
Sliding doors for jambs and jamb covers
Do you have a special project? We also make customized ad hoc solutions.
Our technicians are always available to give you support at the project stage,
Contact us for more information or a consultation!
