GridShutter is the single-version, double-guide system for shutter and grating.
The system is available with integrated motorization, which can also be installed after the installation of the counterframe, for automatic movement of the shutter and grille.
Available up to passage span of 150 cm in width and 290 cm in height.
type of opening
The 150 kg trolley kit consists of 2 ambidextrous self-centering trolleys, each equipped with 4 coated ball bearings, self-centering and interlocking drawbar, brackets for attaching the door panel, adjustable bumper rubber grommet, and variable-hardness trolley stop at rail closure. The kit also includes hardware, dowels and fasteners for fixing. Suitable for wooden door panels.
The integrated motorization kit is the kit that is invisible from the outside to automate the movement of door panels. It includes: a 24V gearmotor with support, 230Vac/24Vdc board-transformer, belt with panel fastening system, idler pulley with belt tensioning system. Can be installed with the counterframe already in place, reducing the passage clearance by about 80 mm; alternatively, prepare an increased counterframe of 100 mm in the design stage. The system is Push&Go: if the panel is moved manually, it completes the opening/closing cycle. The system automatically learns the opening and closing limits of the door and slows down the stroke of the panel before total closing/opening. Standard equipment allows push-button opening (either two-position switch or sequential push-button) and automatic door closing after 2, 5 or 10 seconds of inactivity. Photocells, wall-mounted or pocket remote controls, and home automation kits for opening from smartphones are available.
The kit includes a bottom rail made of aluminum to facilitate panel sliding, up to 120 cm in length. Screws for fixing included. Needs modifications to the bottom milling of the panel.
The 150 kg trolley kit consists of 2 ambidextrous self-centering trolleys, each equipped with 4 coated ball bearings, self-centering and interlocking drawbar, brackets for attaching the door panel, adjustable bumper rubber grommet, and variable-hardness trolley stop at rail closure. The kit also includes hardware, dowels and bolts for fastening.
Suitable for wooden door panels.
The integrated motorization kit is the kit invisible from the outside that allows the movement of door panels to be automated.
Includes: a 24V gearmotor with stand, 230Vac/24Vdc board-transformer, belt with panel fastening system, idler pulley with belt tensioning system.
Can be installed with the counterframe already in place, reducing the passage clearance by about 80 mm; alternatively, prepare an increased counterframe of 100 mm at the design stage.
The system is Push&Go: if the panel is moved manually, it completes the open/close cycle.
The system automatically learns the opening and closing limits of the door and slows down the stroke of the panel before total closing/opening.
Standard equipment allows for push-button opening (either two-position switch or sequential push-button) and automatic closing of the door after 2, 5, or 10 seconds of inactivity.
Photocells, wall or pocket remote controls, and home automation kits for opening from smartphones available.
The kit includes a bottom rail made of aluminum to facilitate panel sliding, up to 120 cm in length. Screws for fixing included.
Needs modifications to the lower milling of the panel.
Handle for sliding glass doors. Available in matte aluminum with metallic bottom.
Square handle with drag lever. Available with keyhole or pawl lock. Available in polished brass, polished chrome and satin chrome.
Square handle kit with drag handle for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Square handle kit with drag handle and keyhole lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Square handle kit with drag handle and pawl lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle with drag lever. Available with keyhole or pawl lock. Available in polished brass, polished chrome and satin chrome.
Round handle kit with drag handle for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle kit with drag handle and keyhole lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Round handle kit with drag handle and pawl lock for sliding door. Available in polished brass, polished chrome and satin chrome.
Technical Drawing
Vertical anodized aluminum handle for sliding door. Available in satin anthracite, satin silver, satin bronze, satin pewter and white.
Front cover plate with drag lever. Available for sliding doors. Available in matte chrome. For other finishes please contact the company.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors. Available in matte chrome. For other finishes contact the company.
Front cover plate for sliding door. Available in matte aluminum with metallic bottom.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors. Available in matte chrome. For other finishes contact the company.
Front cover plate for sliding door.
Available in matte aluminum with a metallic background.
Lock with drag lever for keyhole, pawl or European cylinder. Available for sliding doors.
Available in matte chrome. For other finishes contact the company.
Sliding doors for jambs and jamb covers
Do you have a special project? We also make customized ad hoc solutions.
Our technicians are always available to give you support at the project stage,
Contact us for more information or a consultation!
